The arrow retainer is the part of the crossbow that holds the arrow in place until it is fired. This is an important part of the crossbow, because if it is not properly functioning, then the crossbow will not fire properly.
The arrow retainer is usually made of plastic or metal and can be found on both compound and recurve crossbows. It has a groove on each side so that it can hold two arrows at once.
The arrow retainer also has a trigger guard that protects your fingers from being cut by the string as you are firing your arrows. The trigger guard can be found on both compound and recurve crossbows and is made out of either plastic or metal.
The part of the crossbow that holds the arrow in the track until the trigger is squeezed is called the arrow retainer.
The arrow retainer is the part of the crossbow that holds the arrow in the track until the trigger is squeezed. When you pull back on a crossbow’s string, the arrow is pulled along with it and held in place by this device. When you squeeze the trigger, it releases the arrow so that it can be propelled forward by its own weight and momentum.
The retainer on a compound bow consists of a small hook or tab located at the end of an arm that protrudes from one side of your bow’s limb. This arm catches onto a notch located directly behind each arrow in your quiver when you cock your bow. The notch fits over the hook or tab so that you don’t have to worry about it falling out while you’re preparing for your shot.
The retainer on a recurve bow does not have an arm that protrudes from one side of your bow’s limb like that of a compound bow does; instead, it’s made up of two small tabs located near each end of what looks like a little shelf attached to one side of your limb (or both sides if you have multiple shelves).
It’s also sometimes referred to as an arrow nock.
Arrow retainer is also sometimes referred to as an arrow nock. It’s a small piece of metal that attaches to the back end of an arrow to hold it in place on the bow. Some retainers are simple, while others have more complex designs. The most common type is made from steel or aluminum and has a variety of threads that fit into different types of arrows.
Arrow retainers are usually placed at the end of an arrow so it can be removed from the bowstring after use. They’re used for target practice and hunting purposes, but they’re also used in archery competitions where they can help with scoring accuracy.
The most common type of arrow retainer is made from steel or aluminum and has a variety of threads that fit into different types of arrows. You’ll find this type on most modern bows, whether they’re compound or recurve models. These retainers are fairly easy to install and remove when needed, but if you don’t know how to do this correctly, you could damage your bowstring when installing or removing your arrows from it.
The arrows sit on top of it in a groove or track, and when the trigger is pressed, it releases them.
The arrow retainer is a small piece of metal that holds the arrow in place. It’s attached to the bowstring with a pin or screw, and when you pull on the string, it moves up and out of the way.
The arrow retainer needs to be strong enough for you to pull back without breaking, but thin enough so it doesn’t interfere with your shot. Most modern recurve bows have an aluminum or plastic retainer. The best ones are made from aluminum because they’re more durable than plastic ones.
If you’re trying to shoot an arrow and it falls out of your crossbow, this is likely where you need to look for possible problems.
The arrow may be too short or too long for your crossbow. Check the manufacturer’s specifications to make sure you have the right length arrows.
The arrow rest may not be adjusted properly. The arrow rest should be positioned so that it touches the front of the arrow but does not touch the back of the arrow. If it is touching both, adjust it so that it only touches the front of the arrow.
If there isn’t enough tension on a string or cable, it may slip off of its pulley or sheave, causing your bowstring to fall out. This can happen when stringing a compound bow if you don’t pull hard enough while tightening up all of your strings. You should pull hard enough so that there is no slack in your bowstring once everything is tightened down properly (which is usually indicated by having no more than 1/4″ – 1/2″ of space between strings).
The arrow retainer can wear out over time, and if it does, it may no longer be able to hold arrows securely against the trigger, causing them to fall out.
If you’re shooting a compound bow and your arrows are falling out or not seating properly, you may need to replace the retainer. There are two types of retainers: a crescent-shaped piece that rides on top of the riser and a flat plate that sits behind it.
Replacing a Crescent-Shaped Retainer
If your bow has a crescent-shaped retainer that rides on top of the riser (the front portion) of the bow, you’ll need to remove it before replacing it with a new one. Use needle-nose pliers to grab the edge of the old retainer and pull it off. This will expose screw holes in your riser where screws hold your new retainer in place. Then use an Allen wrench (or any other small-diameter screwdriver) to remove these screws before installing a new retainer.
Some parts of a crossbow can be replaced if broken.
This is especially true for the string, as it takes a lot of abuse during firing. The string is a very important part of the crossbow, as it is what propels the arrow at high speeds. If the string breaks, it must be replaced immediately to prevent further damage to the bow and injury to yourself or other people around you.
Arrow retainer, to keep the arrow on its path in-till the trigger is squeezed. Snatch-back self-catcher made of spring steel.